Mold remediation helps residents stay safe by identifying large-scale mold within the home and eradicating or encapsulating it. When hiring a professional to remediate mold, you’ll have to consider the cost, areas in the house most likely to develop mold (bathrooms, basements, and kitchens), and the different types of mold you could be dealing with. Keep reading to learn more about how to get rid of mold with mold remediation or removal.
What Is Mold Remediation?
Mold remediation reduces mold and mold removal cleans and treats the area to prevent it from spreading. The remediation process gets mold levels back to a normal, natural state. Some molds produce health-threatening mycotoxins.1 While it is impossible to remove all mold in a house, certain levels are acceptable to live with.
Types of Indoor Mold
Certain molds can produce toxins (specifically mycotoxins) but mold themselves is not toxic or poisonous.4 There are three classifications of mold: allergenic (low to moderate); pathogenic (moderate to high); and toxigenic (high to extreme). Below are the most common types of mold found indoors:
Mold Remediation Process
There are several steps to remediate mold in the home and ensure it does not spread to other areas.
Containment and Ventilation
The first step, and arguably the most important, is setting up containment and ventilation. The use of proper ventilation and air filtration devices (AFDs) such as air scrubbers is required to ensure that mold spores that are disturbed and become airborne do not spread to an uninfected area.
Cleaning and Disinfection
Cleaning and disinfecting is the next step, and this is the stage that includes the actual remediation and disposal of infected materials. After the cleaning and disinfecting, the technicians apply biocide/fungicide/moldicide solutions.
Even though chlorine bleach is often used to kill mold, bleach is not an EPA-approved biocide.6 For that, you will need to use a product such as Moldstat, an EPA-registered fungicide. If a space with 3 feet by 3 feet of mold growth is heavily concentrated or near the HVAC system, it should be contained to prevent dispersal.
Fix the Mold Source
The next step is where the technicians address any moisture or humidity concerns. For example, if a loose bathroom fan duct is running into an attic, the fan duct may be fixed. If the fix is easy, the mold remediation company may take on the repair by itself. For more involved repairs, the company may hire a sub-contractor or recommend one for the homeowner.
Encapsulate the Mold
Mold that has not been removed can be encapsulated by paint or a similar material. Encapsulation is an approved method of dealing with mold in a home, though it is only an approved method when most of the mold is removed and the affected area is totally dry. The source or cause of the mold should be fixed before painting or caulking. Encapsulating wet active mold sources is not an approved method.
Conduct a thorough inspection of the property for the signs and source of mold growth.
Develop a action plan for removing the mold safely and in compliance with regulatory standards.
Remove standing water, use dehumidifiers to eliminate moisture, disinfect areas affected.
Sanitize affected areas to kill bacteria and viruses. Use state of the art equipment to test air quality for mold spores.
CGC1535880
Since 1989, our team at Restoration Construction Team has been and continues to be a leader in the Restoration Industry.
Copyright @ 2024 Restoration Construction Team, All Right Reserved